EconoStak - Nationwide Boiler Inc. - Boiler Blog | Nationwide Boiler Inc.
Skip to main content

Boiler Blog | Nationwide Boiler Inc.

Nationwide Boiler news and events, industry updates, technical resources and more. You hear it first on The Nationwide Boiler Blog!

Seven Immediate Energy Saving Ideas

1    Operate Boilers At or Close to Design Capacity. This decreases fuel consumption per unit of production and can result in an estimated energy savings range of 1 percent to 5 percent.  Likewise, if your facility or plant requires excess capacity, visit the Nationwide Boiler website to obtain a current list of boilers for rent or for sale.  Nationwide Boiler provides new and used boilers that can ship immediately, anywhere around the world (conditions apply, contact Nationwide Boiler for details).

2    Reduce Combustion Excess Air. Measure and control air-fuel ratio or oxygen and carbon monoxide content of flue gases from process heating equipment such as furnaces, ovens, and boilers for the entire range of operation. This has an estimated energy savings range of 2 percent to 15 percent. Think about installing a standard low NOx / low excess air burner (compared to an ULN / high excess air burner) on your boiler.  Complemented with a Nationwide CataStak™ Selective Catalytic Reduction System (SCR), a new burner retrofit and SCR installation will not only provide immediate energy savings, but will also reduce NOx emissions and decrease your carbon footprint.

3    Clean Heat Transfer Surfaces. Cleaning heat transfer surfaces lowers flue gas temperature and increases efficiency by improving heat transfer. Doing so can save an estimated 1 percent to 5 percent at a moderate cost.

4    Reduce Radiation Losses from Openings. Reducing radiation losses can save an estimated 1 percent to 2.5 percent at a relatively low cost.
5    Use Proper Oven, Furnace or Boiler Insulation to Reduce Wall Heat Losses. Reducing wall losses produces energy savings of 1 percent to 2 percent with only a moderate investment.

6    Insulate Steam Lines Leaving the Boiler as well as Air- or Water-Cooled Surfaces Exposed to the Oven or Furnace Environment. With an estimated energy savings range of 1 percent to 5 percent, piping insulation can be completed for a moderate investment.

7    Install Air Preheaters or Other Heat Recovery Equipment. This type of equipment recovers available heat from exhaust gases and boiler blowdown and transfers it back into the system by preheating. The potential energy savings range id from 1 percent to 25 percent, depending on process temperatures and other variables.  Consider a Nationwide Boiler EconoStak Economizer or a Heat Recovery (HR) Blowdown Pak to recover valuable heat that can be reused, allowing you to save money in the long-term.

Adapted from Process Heating Magazine, March 21, 2012.

  7093 Hits

Boiler Basics 101: Economizers for Increased Efficiency

The price of fuel is constantly fluctuating and with it comes creative ways to be more economical. Finding methods to be more energy efficient is never a waste of time. In the boiler room, efficiency improvements can be found by many sources, however, a common option for energy savings includes the use of an economizer. What is an economizer? The economizer is a fabricated assembly of finned tubing that captures waste heat extracted from the boiler’s stack flue gases; the exhaust that leaves the boiler stack (or “flue”).

It’s all about the principle of Heat Transfer. While low temperature water, or feedwater, enters a boiler system, high temperature flue gas exits. An economizer captures heat from the flue gas that would typically go to waste, and utilizes it to preheat the feedwater. By doing this, an economizer is able to increase thermal efficiency by decreasing the energy required to heat the water to steam. This will typically result in a reduction of 1% in fuel cost per 10 degree rise in feedwater temperature. Overall, an economizer can be a major cost savings for boiler owners and will easily provide a quick return on investment.

The economizers’ simple technology and static parts provide longevity and low maintenance, and they are available in multiple designs and configurations. Conventional economizers are cylindrical or rectangular and come in a range of sizes for both firetube and watertube boilers. Rectangular designs are more commonly used for larger industrial watertube boilers, and can be configured for vertical or horizontal gas flows, finned or bare tube design, and other additional options if needed. A condensing economizer can improve waste heat recovery even further by cooling the flue gas below its dew point, reclaiming both sensible heat from the flue gas and latent heat by condensing the flue gas water vapor.

         BOILER EFFICIENCY COMPARISON
  Combustion Efficiency at
4% Excess Oxygen
Stack Gas
Temperature
 Boiler  78% to 83% 350F to 355F
 Boiler with Standard Economizer  84% to 86%  250F to 300F
 Boiler with Condensing Economizer  92% to 95%  80F to 150F


When determining whether an economizer is ideal for your boiler equipment, the location of the economizer into stack is important. To ensure the most thermal recovery during the process, you need to make sure the economizer is installed as close to the furnace breach as possible. This will help avoid thermal loss and cooling.

At Nationwide Boiler, we offer our EconoStak economizer as an optional addition (or a standard addition in some cases) on our fleet of watertube rental boilers. The EconoStak consists of the economizer as well as all of the associated piping and structural supports required for very efficient and safe operation. In addition, we are a West Coast representative for E-Tech Heat Recovery Systems, a leading provider of economizers for new, replacement, and retrofit applications.

Contact Nationwide Boiler today to see if an economizer is the right option for you, and be sure to check out our previous Boiler Basics 101 blogs. We review various topics each month, so stay tuned for the next edition!

  10022 Hits