Boiler Blog | Nationwide Boiler Inc.

Within the RECLAIM standards, Rule 1146 outlines specific guidelines for boilers, steam generators, and process heaters that have a heat input of 5 mmBtu/hr or greater, that are utilized in all industrial, institutional, and commercial operations. This rule has changed several times, and at the end of 2018, another revision to the rule was adopted. All Group 1 units (>/= 75MMBTu/hr) as well as Group II units (20 - 75 MMBTu/hr) with an existing permit limit greater than 2 ppm must comply with a 5 ppm NOx limit. In addition, facilities that qualify must be in compliance by 2022 – 2023. The table below outlines all equipment and current limits based on category and heat input.

If your facility falls into the RECLAIM bubble, Nationwide Boiler can assist in bringing your stationary equipment up to current standards to comply with the latest rules and regulations. Our CataStak™ SCR system is proven to reduce NOx emissions to as low as 2.5 ppm on boilers, fired heaters, and other demanding applications. Imagine what we can do for your facility to get you in compliance with RECLAIM!

Stay tuned for part 2, where we will outline specific rules and regulations within the SJVAPCD.

Temporary steam will be necessary at some point in the lifetime of a boiler, so boiler owners should be prepared and know what rental boiler options are out there. Let’s review one of the most convenient rental boiler types available on the market today: The Mobile Boiler Room.

Mobile Boiler Rooms come in a wide range of sizes, typically ranging from 50 to 1,000 hp with design pressures of up to 290 psig. They are completely pre-piped and wired and incorporate all necessary auxiliary equipment for a functioning mobile steam plant. This typically includes a feedwater system, duplex water softener, chemical feed system, blowdown separator, and motor control center. Some units are dual-fuel fired, while others are natural gas only to achieve ultra-low NOx emissions compliance. In addition, Nationwide Boiler maintains multiple units that are pre-permitted for use in the SCAQMD to help simplify the air permitting process for our customers.

Mobile Boiler Rooms are often utilized in heavy commercial and industrial applications for added capacity or for supplemental steam. Some of the main advantages to this type of system include:

   - A Mobile Boiler Room is permanently mounted to a highway-legal trailer, so there is no time lost locating a suitable trailer
     for transportation.
   - Being permanently mounted to a trailer also avoids the need for cranes for loading and un-loading, saving both time and money.
   - Mobile Boiler Rooms are completely enclosed and fully weatherproof – no need for temporary enclosures.
   - No expensive and time-consuming foundations are necessary. Only a reasonably level surface is required.
   - All the necessary auxiliary equipment is included, pre-piped and wired. This saves valuable field time and expense.
   - Customers only connect the steam, fuel, water, and electricity drains, everything else is assembled and ready to go.

A Mobile Boiler Room is the closest you can get to a “plug-and-play” rental boiler system. They provide a packaged temporary steam plant that can be up and running in hours if an emergency need arises.  In fact, units have been installed and operational in just eight hours after arrival.

Visit our website to see all rental boilers available from Nationwide Boiler and give us a call today to assist with your next planned or unplanned temporary steam project.